Boot Configuration Data (BCD) missing or corrupted.
Boot file or MBR corrupted.
Operating system Missing.
Boot sector missing or corrupted.
Bootmgr missing or corrupted.
Unable to boot due to system hive missing or corrupted.

DATA_BUS_ERROR — This error is usually caused by RAM.
MACHINE_CHECK_EXCEPTION — An error often caused by a faulty CPU or power supply.
INACCESSIBLE_BOOT_DEVICE — Occurs when Windows can’t read the hard device that your system boots from.
HAL_INITIALIZATION_FAILED — Caused by general hardware or driver issues.

Boot Configuration Data (BCD) missing or corrupted.
Boot file or MBR corrupted.
Operating system Missing.
Boot sector missing or corrupted.
Bootmgr missing or corrupted.
Unable to boot due to system hive missing or corrupted.

DATA_BUS_ERROR — This error is usually caused by RAM.
MACHINE_CHECK_EXCEPTION — An error often caused by a faulty CPU or power supply.
INACCESSIBLE_BOOT_DEVICE — Occurs when Windows can’t read the hard device that your system boots from.
HAL_INITIALIZATION_FAILED — Caused by general hardware or driver issues.

Windows Errors 1 POST Beeps 2 Blue Screen of Everyday Life (BSoD) 3 Too Little Virtual Memory 4 Missing DLLs Device Errors 6 Critical Exceptions 7 System Code Errors

Safe Mode is always a good place to troubleshoot Windows startup issues. Safe Mode, like the operating system, only boots with normal drivers and programs, allowing you to troubleshoot without identifying the owner without the culprit. If the system boots successfully in safe mode, it means that the problem is caused by a third party environment process.

If the Startup Repair screen appears and tells you that it cannot repair your computer, click Advanced Options. This will remove the computer screen from RE Windows (Recovery Environment). If it says at boot that the problem can be fixed, reboot your system to see if the problem is actually fixed. Otherwise, continue.

But for all the simple common Windows error codes, I will provide you with a solution. System error. Code: 2. The system cannot find the specified file in any way. So you need to remove NCP and DUN. Reinstall NCP and DUN later to help find said file. Verify that the person entered the correct username and password in the NT/2k associated domain field.

Here are the 2 most common cases: Windows 10/11 Startup Repair Interceptor is also known as Windows 10/11 Startup Repair. When you encounter this error, Windows 10/11 keeps blocking Startup Repair and is an endless loop preventing you from accessing anything other than the computer.

Insert Recovery Thrust You (if you have one) or my installation DVD and restart your computer. When it launches from the pump, select “Troubleshoot”, then “Advanced Options” and finally “Startup Repair”. If Startup Repair is successful, the computer will restart and start normally.

This section presents approaches that can fix problems that may occur during the Windows boot process in the form of a new set of hard drive corruption, track corruption, missing files, and third-party bike errors. First, we’ll describe the third recovery modes for Windows startup issues: Last Known Good Mode, Safe Mode, and Windows Environment Edition (WinRE).